Chinese wholesale Chip Varistor - Surge Protection Devices – TP10D – Ruilongyuan

Chinese wholesale Chip Varistor - Surge Protection Devices – TP10D – Ruilongyuan

Short Description:

Product Detail

Product Tags

Related Video

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our corporation to the long-term to establish collectively with customers for mutual reciprocity and mutual benefit for Smbj16a , Resettable Polyfuse , P6ke100ca , Our merchandise delight in excellent popularity among our buyers. We welcome consumers, business enterprise associations and good friends from all components with the globe to make contact with us and seek out cooperation for mutual rewards.
Chinese wholesale Chip Varistor - Surge Protection Devices – TP10D – Ruilongyuan Detail:

Outdoor and Commercial

Wash wall lighting

LED Lighting

Parking garage/lot

Roadway lighting


Traffic lighting

Flood lighting

Digital signage

Tunnel lighting

Security power supply

Street lighting

1.UVT: It is an abbreviation of Ultra low voltage triggering technology. It is a design that absorb the high and low voltage energy of the surge in advance. It can absorb the surge energy more completely, and the residual voltage is low, and the protection effect on the back-end equipment is obvious. This technology is patented by Ruilongyuan.

2.Class I: In this paper, a luminaire that refers to “accessible conductive parts connected to protective earthing conductors in fixed wiring” (from IEC60598 – luminaires – general requirements and test – Chinese version).

3.Class II: In this paper, the term “light-protection protection is not only dependent on basic insulation, but also has additional safety measures, such as double insulation or reinforced insulation, but no protective grounding or protection measures depending on installation conditions” (from IEC60598-4.Luminaires – General Requirements and Tests – Chinese version).

4.Leakage current: In this paper, the current flowing through the SPD does not occur when the power is connected. For example, zinc oxide varistor is a device with leakage characteristics.

5.Freewheeling: Current from the connected power source that flows through the SPD during and after the discharge current passes. For example, gas discharge tubes and thyristors are devices with freewheeling characteristics (cited from IEC61643-11).

6.10kA: refers to the maximum discharge current (Imax) in the 8/20μs surge waveform test.

7.10kV: refers to the nominal discharge voltage (Vn) in the 1.2/50μs surge waveform test.


Test Standard: EN61643-11/ UL14494th



Electrical parameters

Rated operating voltage8



Max. Continuous voltage9



Cross-section area (Flexible)



Mounting on



Surge parameter

Norminal discharge current10(8/20μs) (In)



Max. discharge current11 (8/20μs) (Imax)



Nominal discharge voltage12(1.2/50μs) (Vn)



Maximum discharge voltage13(1.2/50μs) (Vmax)



Voltage protection level14 (Up)









Placement and transportation parameters

Enclosure material



Operating temperature range


Ingress Protection






Weight (One piece)



Package size



Package quantity



8.Rated operating voltage: The normal AC mains voltage rating assigned by the manufacturer to the SPD (cited from Ul1449).

9.Max. Continuous voltage: The maximum rms voltage that can be continuously applied to the SPD (cited from IEC61643-11).

10.Nominal discharge current: The current peak selected by the manufacturer. With SPD, the current waveform is 8/20μs, and the SPD remains functional after 15 surges (from UL1449)

11.Maximum discharge current: The peak value of the SPD current flowing through the 8/20 waveform and the manufacturer’s claimed amplitude. Belongs to the T2 test type (quoted from IEC61643-11).

12.Nominal discharge voltage: The discharge open circuit voltage peak with a 1.2/50 μs waveform and flowing through the SPD (this parameter is the RUILON laboratory custom parameter, which is equivalent to the open circuit voltage Uoc defined by the T3 test in IEC61643-11).

13.Maximum discharge voltage: The peak value of the SPD voltage flowing through the 1.2/50 waveform and the manufacturer’s claimed amplitude (this parameter is the RUILON laboratory custom parameter, which is twice the open circuit voltage of the T3 test in IEC61643-11). (2Uoc)).

14.Voltage protection level: The maximum voltage expected to occur between the two ends of the SPD due to the application of a specified gradient of the impulse voltage and the specified amplitude and the inrush current of the waveform (cited from IEC61643-11).

Surge test characteristics of TP20D




Pulse Rating

















Nominal discharge voltage: 20kV, 1.2/50μs;

Maximum discharge current: 20kA, 8/20μs;

Executive standard: IEC/EN:61643-11/UL14494th;

Parallel SPD equipment;

UVT ultra-low voltage technology, more adequate protection;

With lead wire for easy connection;

Ultra-thin shape: 79.5  × 38.6  × 16.5, easy to reset;

IP65 waterproof and dustproof;

Installation of Class I and Class II lamps that meet the rated voltage of 110 to 277 VAC;

Excellent performance after TTF’s rigorous testing.

Certified by CB, UL, TUV and CE.

A variety of wiring methods are combined to meet string and parallel wiring requirements.

about uvt

Since the introduction of the 20kV ultra-thin surge suppressor in 2014, Ruilongyuan Electronics has continuously improved its surge protection technology and proposed the theoretical concept of efficient absorption of surge energy. After many tests, the circuit model was established and the ultra-low voltage triggering scheme (UVT1) was introduced. It was applied to the new totem surge suppressor, which greatly improved the surge protection efficiency and played a good role in the protected equipment. Surge protection effect.

Typical installation diagram


1.The connection line of the lightning arrester will be  connected after tining.

2.If there are no wiring terminals, wires should be welded,and the welds need to do isolation treatment.

3.L—-Brown;  N—- Blue; P E—Yellow and Green.


Disclaimer Notice -

Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. RUILON products are not designed for, and may not be used in, all applications.

Product detail pictures:

Chinese wholesale Chip Varistor -
 Surge Protection Devices – TP10D – Ruilongyuan detail pictures

Related Product Guide:

We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for Chinese wholesale Chip Varistor - Surge Protection Devices – TP10D – Ruilongyuan , The product will supply to all over the world, such as: panama , New Zealand , Paraguay , Our staffs are adhering to the "Integrity-based and Interactive Development" spirit, and the tenet of "First-class Quality with Excellent Service". According to the needs of every customer, we give customized & personalised services to help customers achieve their goals successfully. Welcome clients from home and abroad to call and inquire!
  • Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
    5 Stars By Erin from Austria - 2018.07.27 12:26
    As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Jane from Mauritius - 2017.06.25 12:48
    Write your message here and send it to us